500 LC - Specifications
Chassis
| Frame profile | 60 x 40 mm |
| Outside length | 805 mm |
| Outside width | 575 mm |
| Zinc-plated and powder-coated according to RAL | |
| Stationary with emergency castors (lift & go) | |
| Detachable foot control (total up/down, head up/down) | |
| Emergency stop | |
| Screws in vision field, Chrome-Nickel-Steel (CNS) |
Lifting column
| Head part | ||
| Power 3,000 N | lifting 29 mm | length 397 mm |
| Back part | ||
| Power 6,000 N | lifting 168 mm | length 336 mm |
| Seat part | ||
| Power 3,000 N | lifting 202 mm | length 395 mm |
| Height adjustment | ||
| Power 3,000 N | lifting 300 mm | length 467 mm |
| Motors IPX4 |
Top frame
| 4-part support frame (head, back, seat, foot) | |
| Length | 1,870 - 1,950 mm |
| Width | 610 mm |
| Width incl. Arm rest | 835 mm |
| Height adjustment range | 580-880 mm |
| Removable upholstery Tundra skai | |
| Tundra skai- colours see colour chart Tundra skai |
Electronic control
| All components according to IPX4 |
| Remote control |
| 3 preprogrammed positions and reset button |
Accumulator unit
| Independent accumulator box | 2x12V 7.2 Ah |
| As back-up-system exchangeable without tools | |
| SMPS – switched-mode power supply | |
| Acoustical low voltage signal as discharging protection |
Operating time per battery charge
| measured by operating circle (Prepare, Operate, Recover) | 30 OPs |
| -quantity of operating circles depends on individuell operation- |
Electromotive drives
| Head, back, seat, foot, total up/down |
| Trendelenburg/Antitendelenburg |
Further technical details
| Detachable, swiveling, running along arm rests, completely PU foamed |
| All touchable metal parts connected to the earth connection |
| Detachable seat part for service friendly access to electric components |
Max. load
| 250 kg / 550 lb |
Weight
| 125 kg / 225 lb |
About 500 LC
- Abstract (PDF 3.3 MB)
- Catalog (PDF 23 MB)
- Colour Table (PDF 1.5 MB)
- Colour Configurator (Popup)